If your Glow-worm boiler has has stopped working and developed a fault then MR Boiler Repairs have created a library of fault codes on Glow-worm HX boilers. This is to help you identify the fault you’re a experiencing with your Glow-worm boiler. Listed below are all the manuals for Glowworm. Just click on the model or the Gas council number and the manual will download at the bottom of the page. After you have downloaded the manual double click on the download for the manual to open, if you want to save the download right click. Sep 21, 2011 Installed glow worm Flexicom 12 HX. How to use/set a central heating timer. Combi boiler mechanical timer (Baxi Duo Tec) - Duration: 2:20. POUSE around the HOUSE 348,392 views.
0020107230_04 - 12/14 - Glow-worm
MAINTENANCE
- 32 -
12.6. Heat Exchanger
NOTE: If the functional checks did not indicate poor
combustion then it is not necessary to service this
component.
Remove loose debris from inside the heat exchanger using a
soft brush and vacuum cleaner.
Carefully fl ush by spraying water into the heat exchanger, any
remaining debris should pass through the condensate trap
(Ensure the water is kept away from electrical components).
12.7 Condense Trap and Siphonic Drain
The condensate trap and siphonic drain does not normally need
servicing unless material deposits exceed beyond the service fi ll
level, see diagram 12.13.
To clean the condense trap remove the sump and rinse with
water.
Diagram 12.13
14089
SECURING
NUTS (6)
The garage door will reverse open and WILL NOT close until the obstructions are clear or the safety reversing sensors are correctly installed. Error code 4-4 liftmaster model 8550w-267 user manual. When the obstruction has been cleared or the safety reversing sensors have been aligned, the door will close when the garage door opener is activated.To temporarily suspend the TTC feature press and release the HOLD button. The LIGHT button will not control the lights when the door is in motion.Push BarLIGHT ButtonScreenMotion SensorNavigation ButtonsThe TTC feature will deactivate if the garage door encounters an obstruction twice; or the safety reversing sensors are incorrectly installed. Press REL button to resume normal TTC operation.TIMER-TO-CLOSE (TTC)DO NOT enable TTC if operating a one-piece door.
BURNER
FAN CLAMPING
BRACKET
Diagram 12.12
14410
14397
12.8 Casing panel seal check
NOTE: If the functional checks did not indicate poor
combustion then it is not necessary to service this
component.
Check the condition of the seal and replace if worn or damaged.
To replace remove the old seal and thoroughly clean the casing
surfaces. Fit the new seals, these are supplied to the correct
lengths and are in four pieces, for use on the sides, top and
bottom.
12.9 Service Completion
Re-check the combustion as described at the beginning of this
section.
On completion of the service the “Benchmark” Service Record
should be completed.
14460
1
Fitting the Analogue Timer (to a boiler without timer
housing)
Check this one out by clicking the link below:2.1 Sound BarOur thierd choice will give you a front 38″ unit plus a 75” subwoofer. Check this one out by clicking the link below:5.1 Sound BarWith Our fourth choice you will be getting a great sound bar, a subwoofer and also the satellite speakers at a fantastic price. Furthermore, you will be happy to know that this model is the #1 Best Seller in Amazon Sound Bars category. Check this one out by clicking the link below:With Our fifth choice has longer sound bar and larger subwoofer that enable you to have an incredible wide range surround sound that will enhance your big screen home cinema experience to the next level. Vizio 29 2 0 sound bar. Check this one out by clicking the link below:Our second choice will give you a basic front sound bar like our first choise but with 38″ extra power.
If the boiler does not contain the timer housing,
follow the instructions below.
If the boiler does contain the boiler housing, follow
the instructions detailed in section 2.
1.1
Glow Worm Flexicom Hx User Manual Pdf
Remove the front casing and hinge down the control
box.
1.2
Remove the timer blanking plate at the bottom of
the boiler by pressing the retaining latches, using an
appropriate tool e.g. a flat bladed screwdriver.
Carefully remove the blanking plate.
The timer kit harness and plug are attached to the
blanking plate to aid fitting of the timer.
Unplug the harness from the blanking plate by pressing
the retaining catch.
TIMER
BLANKING
PLATE
use a flat bladed screwdriver here
to remove the blanking plate
TIMER KIT HARNESS
AND PLUG
RETAINING
CATCH
TIMER
BLANKING
PLATE Vaporfi v grip 220w tc user's manual free.
1.3
Fit the plug to the timer kit socket, the plug will only fit
one way.
18 17
16
15
14
13
12
11
8
19
20
21
22
23
24
10
9
7
6
5
4
3
2
1
TIMER KIT SOCKET
Glow Worm Flexicom Hx User Manual Youtube
1.4
Glow Worm Flexicom Hx User Manual 2017
Locate the timer kit body into the space left by the
blanking plate on the underside of the boiler.
TIMER AND
HOUSING
1.5
Ensure good positioning of the harness then replace
control box and front casing.
1.6
Re-establish mains and gas supply to the boiler.
When using the timer, push the bottom of the timer kit
slide to release it from it’s housing, allow the timer to
fall naturally, it’s movement is controlled by a damper,
do not pull the timer down. To re-engage the timer,
push gently upwards until it clicks into position.
0020136593 - 01/12 - Glow-worm
- 3 -
INSTALLATION
EN